三菱 700 三菱-700 70 系列 Programming 手冊 (Machining Center System)
所屬類別：三菱
>> 伺服驅動器和伺服電機
資料介紹：
Introduction
This manual is a guide for using the MITSUBISHI CNC 700/70 Series.
Programming is described in this manual, so read this manual thoroughly before starting
programming. Thoroughly study the "Precautions for Safety" on the following page to
ensure safe use of this NC unit.
Details described in this manual
CAUTION
For items described in "Restrictions" or "Usable State", the instruction manual issued by the machine
tool builder takes precedence over this manual.
An effort has been made to note as many special handling methods in this user's manual. Items not
described in this manual must be interpreted as "not possible".
This manual has been written on the assumption that all option functions are added. Refer to the
specifications issued by the machine tool builder before starting use.
Refer to the Instruction Manual issued by each machine tool builder for details on each machine tool.
Some screens and functions may differ depending on the NC system or its version, and some
functions may not be possible. Please confirm the specifications before use.
General precautions
(1) Refer to the following documents for details on handling
MITSUBISHI CNC 700/70 Series Instruction Manual ................................. IB-1500042
保護膜 GT15-70PSGB
電壓輸出定位控制模塊 A1SD70
定位模塊 QD70P4，QD70P8
背光燈 GT15-70SLTT
伺服放大器 MR-J3-700A
伺服放大器 MR-J3-70A
背光燈 GT16-70SLTT
伺服馬達 HF-SP702
DC型輸入模塊 QX70
伺服放大器 MR-J2S-70B
保護膜 GT15-70PSGW
伺服放大器 MR-J3-70B
背光燈 GT15-70VLTN
TTL CMOS輸出模塊 QY70
輸入模塊 A70LX-S3
大型CPU擴展電纜 GT15-A370C25B
伺服電機 HC-SFS7024
定位模塊 AD70
輸入模塊 AX70
輸出模塊 AY70
伺服馬達 HA-LFA701M4B
伺服馬達 HF-SP702B
附件 GT15-70ATT-98
定位模塊 QD70P8
保護膜 GT16-70PSGB
伺服馬達 HA-LFS701M
DC型速輸入模塊 QX70H
伺服放大器 MR-J3-700B
保護膜 GT15-70PSCW
伺服放大器 MR-J2S-70A
上一條：
下一條：相關下載
