三菱 FX2N 三菱-FX2N-20GM 用戶指南
資料介紹：
The state of FX2N-20GM is displayed by LED.
Name of LED Content
POWER LED lights when power is supplied. If LED is not lit, check power supply voltage and
current.
READY-X LED lights when accepting an x-axis instruction. During pulse output or when an error
occurs, the LED is off.
READY-Y LED lights when accepting a y-axis drive instruction. During pulse output or when an
error occurs, the LED is off.
ERROR-X LED is lit or blinks when an error occurs in the positioning drive of x axis.
ERROR-Y LED is lit or blinks when an error occurs in the positioning drive of y axis.
BATT LED lights when the buttery voltage drops. (Turn Power Supply On)
CPU-E CPU error. Incompatible system configuration, excess noise, etc.
4.3 I/O connector
The pin array of the I/O connector is as follows.
All terminals with identical names are shorted internally (Ex. COM1-COM1, VIN-VIN, etc.).
Do not wire “•” terminals.
Refer to the FX2N-10GM, FX2N-20GM HARDWARE PROGRAMMING MANUAL for wiring information.
=
=
=
=
"
=
=
&
"
=
=
#0!5+% #0!5+% #0!5+% #0!5+%
輸入模塊 FX2N-16EX
PLC FX2N-48MT-ES/UL
RS-485擴展板 FX2N-485-BD
PLC FX2N-32MR-UA1/UL
輸入輸出模塊 FX2N-8ER
PLC FX2N-64MT-D
脈沖輸出模塊 FX2N-10PG
定位模塊 FX2N-10GM
繼電器輸出模塊 FX2N-16EYR
PLC FX2N-32MR-DS
PLC FX2N-48MT-001
PLC FX2N-128MR-D
PLC FX2N-80MT-001
PLC FX2N-80MR-DS
PLC FX2N-128MR-001
PLC FX2N-80MR-001
繼電器輸出單元 FX2N-48ER-UA1/UL
PLC FX2N-32MR-ES/UL
模擬量輸入模塊 FX2N-8AD
繼電器輸出模塊 FX2N-8EYR
MELSEC-I/O LINK主站模塊 FX2N-16LNK-M
PLC FX2N-48MR-UA1/UL
可控硅輸出單元 FX2N-32ES
PLC FX2N-80MT-ESS/UL
擴展模塊 FX2N-8EYT
模擬量輸出模塊 FX2N-2DA
PLC FX2N-16MT-ESS/UL
PLC FX2N-16MR-ES/UL
PLC FX2N-80MS
輸入模塊 FX2N-8EX
上一條：
下一條：相關下載
