三菱 manual 三菱-manual_J2S-B（英文）
資料介紹：
CAUTION
Securely attach the servo motor to the machine. If attach insecurely, the servo motor may come off during
operation.
The servo motor with reduction gear must be installed in the specified direction to prevent oil leakage.
Take safety measures, e.g. provide covers, to prevent accidental access to the rotating parts of the servo
motor during operation.
Never hit the servo motor or shaft, especially when coupling the servo motor to the machine. The encoder
may become faulty.
Do not subject the servo motor shaft to more than the permissible load. Otherwise, the shaft may break.
When the equipment has been stored for an extended period of time, consult Mitsubishi.
(2) Wiring
CAUTION
Wire the equipment correctly and securely. Otherwise, the servo motor may misoperate.
Do not install a power capacitor, surge absorber or radio noise filter (FR-BIF option) between the servo
motor and servo amplifier.
Connect the output terminals (U, V, W) correctly. Otherwise, the servo motor will operate improperly.
Connect the servo motor power terminal (U, V, W) to the servo motor power input terminal (U, V, W)
directly. Do not let a magnetic contactor, etc. intervene.
U
Servo motor
M V
U
V
U
M V
U
V
Servo amplifier Servo motor Servo amplifier
GT16觸摸屏 GT1665M-VTBD
伺服放大器 MR-J3-60B
閃存卡 QD81MEM-1GBC
PLC FX1N-40MR-001
串行多點連接單元 GT01-RS4-M
PLC FX2N-48MT-D
伺服放大器 MR-J3-500B
伺服放大器 MR-J2S-11KA
電磁制動器用電纜 MR-BKS1CBL5M-A1-L
可選功能板 GT16-MESB
PLC FX2N-32MS-E/UL
編碼器用電纜 MR-EKCBL10M-L
伺服電機電源用電纜 MR-PWS1CBL5M-A1-H
編碼器接頭 MR-J3ENSCBL2M-H
PLC FX2N-48MR-DS
CF卡 GT05-MEM-1GC
PLC FX2NC-64MT-DSS
PLC FX1N-40MT-ESS/UL
伺服馬達 HA-LFS37K1M4
編碼器電纜 MR-JCCBL2M-H
伺服控制器 MR-J2S-11KB
Q系列PLC內存卡 Q2MEM-1MBS
PLC FX1N-60MT-D
存儲卡 FX2N-ROM-E1
伺服電機電源用電纜 MR-PWS1CBL10M-A1-L
編碼器接頭 MR-J3ENSCBL10M-H
AS-I主站模塊 FX2N-32ASI-M
SSCNET Ⅲ 光纖 MR-J3BUS1M
對應SSCNET III定位模塊 QD75MH4
PLC FX2N-48MS-E/UL
上一條：
下一條：相關下載
