三菱 手冊 三菱-手冊_ib0800175h
所屬類別：三菱
>> 伺服驅(qū)動器和伺服電機
資料介紹：
Pulling the cable that is connected to the CC-Link board may cause damage to the CC-Link
board and cable or malfunction due to bad cable contacts.
TART UP AND MAINTENANCE PRECAUTIONS]
!
CAUTION
• Do not disassemble or modify each module.
Doing so could cause failure, malfunction, injury or fire.
• Switch all phases of the external power supply off when mounting or removing the CC-Link boa
Not doing so may cause failure or malfunction of the CC-Link board.
• Do not touch the terminal while the power is on.
Doing so may cause malfunction.
• Switch all phases of the external power suppl y off when cleaning or retightening terminal scre
or module installing screws.
Not doing so may cause failure or malfunction of the CC-Link board.
If the screws are loose, it may cause the short circuits or malfunction.
If the screws are tightened too much, it may cause damages to the screws and/or the CC-Lin
board, resulting in short circuits or malfunction.
• Always make sure to touch the grounded metal to discharge the electricity charged in the bod
etc., before touching the CC-Link board.
Failure to do so may cause a failure or malfunctions of the CC-Link board.
ISPOSAL PRECAUTIONS]
模塊 AJ35PP-CNV-GI
RS-232C通訊用模塊 FX2N-232IF
模塊 AD35ID1
外部輸入/輸出單元 GT15-DIO
模塊 AJ71ID2-R4
外部輸入/輸出單元 GT15-DIOR
模塊 A1SJ71ID1-R4
中繼模塊 AJ65BT-RPI-10B
模塊 AD32ID1
電流輸出模擬量模塊 Q68DAIN
轉(zhuǎn)換電纜 FX2N-CNV-IF
模塊 AJ35PTC-CNV-GI
模擬量模塊 AJ65BT-64DAI
中斷模塊 AI61
模塊 A1SD35ID1
速中斷模塊 A1SI61
中斷模塊 QI60
模塊 A1SD32ID1
模塊 AJ35PTC-CNV-GI
模擬量輸出模塊 Q68DAV，Q68DAI
中斷模塊 AI61-S1
適配器 Q6DIN3
轉(zhuǎn)換適配器 FX2NC-CNV-IF
模擬量輸出模塊 A1S68DAI
模擬輸出模塊 A616DAI
模塊 A1SD32ID2
中繼模塊 AJ65BT-RPI-10A
模塊 AJ35PP-CNV-SI
電流輸入模擬量模塊 Q68ADI
模塊 AJ35PP-CNV-SI
上一條：
下一條：相關(guān)下載
