菱 Temperature Control 三菱-Temperature Control 模塊 用戶手冊
所屬類別：三菱
>> 伺服驅動器和伺服電機
資料介紹：
When disconnecting a cable without a connector, first loosen the screws on the part that is
connected to the module.
Pulling the cable when it is still connected to the module may cause damage to the module or
cable, or misoperation due to cable contact failure.
• Always ground the shielded cable for the programmable controller.
There is a risk of electric shock or malfunction.
• Use applicable solderless terminals and tighten them with the specified torque. If any solderless
spade terminal is used, it may be disconnected when the terminal screw comes loose, resulting
in failure.
• When wiring, be sure to verify the rated voltage of the product as well as the terminal layout. Fire
or failure may result if incorrect voltage is input or incorrect wiring is performed.
• Connecting terminals with incorrect voltage may result in malfunction or mechanical failure.
繼電器端子模塊電纜 AC100TE
串行通信單元 GT15-RS4-TE
繼電器端子模塊電纜 AC50TE
晶體管輸出模塊 AJ65FBTA2-16TE
繼電器端子模塊電纜 AC10TE
晶體管輸出模塊 AJ65SBTB1B-16TE1
連接電纜 AC100TE
連接電纜 AC06TE
連接電纜 AC30TE
晶體管輸出模塊 AJ65SBTB1-32TE1
繼電器端子模塊電纜 AC30TE
繼電器端子模塊 A6TE-2-16SRN
DC 輸入/晶體管輸出模塊 AJ65FBTA42-16DTE
DC 輸入/晶體管輸出模塊 AJ65SBTB1-32DTE1
晶體管輸出模塊 AJ65SBTB1-8TE
模塊 A6TE2-16SRN
連接電纜 AC50TE
晶體管輸出模塊 AJ65SBTB1-16TE
繼電器端子模塊電纜 AC06TE
彈簧夾端子臺 Q6TE-18S
繼電器端子模塊 A6TE2-16SRN
連接電纜 AC10TE
上一條：
下一條：相關下載
